Differences

This shows you the differences between two versions of the page.

--- documents:de4000:de4000script [2021/12/23 12:24]
admin
+++ documents:de4000:de4000script [2022/07/08 13:11] (current)
rjackson
@@ Line 1: / Line 1: @@
-<html>
+=====DE-4000 SCRIPTING REFERENCE MANUAL=====
-<body>
-This is html
+There is a delicate balance between providing a system that has capabilities that can be configured through a fixed set of options, and one that can be extended and expanded with custom programming. In designing the DE-4000 control system, the choice was made to provide a system where most applications can be met with simple configuration, but advanced functionality can be provided through custom programming using the "Lua" language.
-</body>
-</html>
+Lua is often referred to as a scripting language. Scripting languages differ from compiled languages as they eliminate extra step of compiling the written program into machine code.
+Lua comes with a background of being robust, fast, and geared towards embedded
+applications, with a proven track record in the gaming industry. For the DE-4000
+system it is small and fits in the memory we have available, holds a lot of power, and
+keeps it simple for writing in the language.
+All information regarding the Lua scripting language is located at https://Lua.org
+Using the Lua engine as an embedded tool allows for taking advantage of a full
+architecture and standard at your fingertips. Within the language there are all of
+the normal attributes to programming such as functions, variables, statements,
+expressions etc. All of this reference material can be found at https://lua.org/
+manual/5.3/
+For getting started and using a guided reference, there are several editions of
+“Programming in Lua” available. Most recent editions are a paid for product that
+come in paper back or ebook form. While testing out Lua and becoming familiar, a
+free first edition is available and covers a lot of learning needs to get comfortable with
+the language. It can be located at https://www.lua.org/pil/contents.html.
+A major advantage to using Lua is its inherent ability to allow custom functions. While
+all normal functions and calls are published, there is the ability to add new functions
+in the DE-4000 firmware. Once new functions are defined and have calls to their
+internal properties, they then can be published for the user. This includes functions
+such as our flexible Modbus table and talking with various terminal boards linked in
+the system. Below is the start to the list of Altronic based functions. As functionality
+and features come to life through new ideas, this document will continually get
+updated with the latest scripts that we make available.
+GETTING STARTED WITH DE-4000 SCRIPTS
+Basic Scripting on DE-4000
+===== - Begin on Dashboard on DE-4000 system environment =====
+{{:documents:de4000:scripting_dashboard_1.jpg?400|}}
+===== - Choose “Global” from menu on left side of screen =====
+{{:documents:de4000:scripting_dashboard_2.jpg?400|}}
+===== - In the Sub-Menu on the Left side select “Scripts” =====
+{{:documents:de4000:scripting_dashboard_3.jpg?400|}}
+===== - Select one of the page icons under one of the 4 script options to open editor =====
+{{:documents:de4000:scripting_dashboard_4.jpg?400|}}
+===== -  Scripting can be entered into the editor =====
+{{:documents:de4000:scripting_dashboard_5.jpg?400|}}
+**Scripting Windows and examples**
+**Master Script**
+{{:documents:de4000:scripting_dashboard_master_script.jpg?90|}}  The Master Script section is the Primary scripting environment.
+Primary scripting functions can be written in this section.
+**Example:**
+<code lua>
+local suction = get_channel_val(1,1)
+local discharge1 = get_channel_val(1,3)
+diff = discharge1 - suction
+set_sVirt(“Difference”, diff)
+</code>
+The first line gets the channel value from Terminal board 1 Input 1 and stores it
+in local variable named suction.
+The second line gets the channel value from Terminal board 1 Input 3 and stores
+it in local variable named discharge1.
+The third line takes the discharge1 pressure and subtracts the suction pressure
+and stores it in the global variable named diff (NOTE: Any value that you want to
+access from another scripting section must be stored in a global variable. This is
+used most in calling values into Modbus registers as explained below).
+The fourth line copies the value from diff and stores it into the Virtual status
+channel named “Difference” This channel can be displayed on the Dashboard.
+**Control Script**
+{{:documents:de4000:scripting_dashboard_control_script.jpg?90|}}
+The Control Script section is used to override the default control
+strategy found on the Global/Control page. A copy of the default
+control script (found in attached appendix) can be copied into this
+section and then modified to change the control functionality as well
+as add additional control loops beyond the default 2.
+{{:documents:de4000:scripting_dashboard_control_script_2.jpg?400|}}
+**Modbus Script**
+{{:documents:de4000:scripting_dashboard_modbus_script.jpg?90|}}
+The Modbus Script section is used to move data into and out of
+Modbus registers
+{{:documents:de4000:scripting_dashboard_modbus_script_2.jpg?400|}}
+<code lua>
+defaultModbus()
+set_modbus(300,diff)
+</code>
+The first line pulls in the factory set Modbus mapping
+The second line moves the value from the global variable named diff into the
+Modbus Register
+==== - DE-4000 Lua Script API ====
+<markdown>
+**CUSTOM FUNCTIONS FOR SCRIPTING**
+---
+##### create_param("index",default,"catergory","description")
+* creates a user configurable parameter
+* parameter is stored as `index`,
+* default value(If not changed by user) is `default`
+* parameters will be grouped on the Global/Params page by `category`
+* `description` is text to describe the parameter to the user
+**Example:**
+```lua
+create_param("NumEngCyl",8,"Engine Params","Num. of Engine Cylinders")
+```
+---
+##### get_channel_val(terminal,channel)
+* returns current value of analog input `channel` on terminal module `terminal`
+* return value type is numeric
+**Example:**
+```lua
+local sp = get_channel_val(1,5)
+```
+> reads value of Suction Pressure  from Terminal Module #1 , Input #5
+---
+##### get_gbl("index",default)
+* returns global config setting stored under `index` or returns `default` if not defined
+> **note:** get_gbl is used to retrieve global CONFIGURATION settings that are typically set when the system is configured and do not change as the system is running.
+> If you want to set and retrieve global STATUS variables use the get_sGbl() and set_sGbl() functions
+>If you want to create and read virtual channels use the set_sVirt() and get_sVirt() functions.
+**Example:**
+```lua
+local nt = get_gbl("NumTerm",1)
+```
+> gets the number of terminal boards installed in the system
+---
+##### get_param("index")
+* return either the default value or the user configured value of the parameter `index`
+**Example:**
+```lua
+get_param("NumEngCyl")
+```
+>gets the configured parameter for number of engine cylinders
+---
+##### get_rpm(channel)
+* reads the RPM input `channel` in units of revolutions per minute
+> **note:** valid channel numbers are 1 - 10(2 channels per board, up to 5 terminal boards)
+Each Terminal Module has 2 RPM inputs (RPM1 and RPM2)
+* Terminal Module **#1** RPM channels are **1,2**
+* Terminal Module **#2** RPM channels are **3,4**
+* Terminal Module **#3** RPM channels are **5,6**
+* Terminal Module **#4** RPM channels are **7,8**
+* Terminal Module **#5** RPM channels are **9,10**
+**Example:**
+```lua
+local engineRPM = get_rpm(1)
+local turboRPM = get_rpm(6)
+```
+> Read RPM1 channel from terminal module #1 and read RPM2 channel from Terminal module #3
+---
+##### get_sGbl("index", default)
+* If `index` is defined in the global status table then it returns the value associated with `index`
+*  If `index` is not defined and optional `default` is provided then returns `default`
+>**note:** It is recommended to always provide a default value when using this function
+**Example:**
+```lua
+local cp = get_sGbl("calculatedPressure",0)
+```
+> get the previously stored value "calculatedPressure", Returns `0` if not found.
+---
+##### get_state()
+* returns the current engine state(possible values currently 0 - 10)
+**Example:**
+```lua
+local engineState = get_state()
+if engineState > 7 then
+    set_timer("WarmupTimer",1000)
+end
+```
+---
+##### get_sVirt("index")
+* returns the value of virtual channel `index` or returns `default` if the virtual channel does not exist.
+**Example:**
+```lua
+local tl = get_sGbl("timeLimit")
+local et = get_sVirt("ElapsedTime",0)
+if et > tl then
+    set_sGbl("timeExceeded",true)
+else
+    set_sGbl("timeExceeded",false)
+end
+```
+>Gets the value of virtual channel ElapsedTime and set value of status global "timeExceeded" if ElapsedTime is greater than status global "timeLimit"
+---
+##### get_time()
+* returns the UNIX "epoch" time (Defined as the number of seconds elapsed since Jan 1, 1970)
+**Example:**
+```lua
+local startTime = get_sGbl("startTime",0)
+if startTime == 0 then
+    local currentTime = get_time()
+    startTime = currentTime
+    set_sGbl("startTime",currentTime)
+end
+local et = get_time() - startTime
+set_sVirt("ElapsedTime",et)
+```
+>Stores current time if first time through, otherwise calculate elapsed time
+---
+##### get_timer("index")
+* returns 1 or 2 values
+* First return value(Boolean) is **true** if timer is active(counting down) or **false** if timer is expired or has not been set yet
+* Second return value is the number of seconds remaining or **-1** if timer is not active or has not been set yet
+**Example:**
+```lua
+if not get_timer("myTimer") then
+    set_sGbl("timedOut",true)
+else
+    set_sGbl("timedOut",false)
+end
+```
+> if timer is expired, then set global status "timedOut" to **true**
+```lue
+local active,remaining = get_timer("myTimer")
+if not active then
+    set_sVirt("timeRemaining","Expired")
+else
+    set_sVirt("timeRemaining",remaining)
+end
+```
+---
+##### getStateLabel(state)
+* return the label for the engine state corresponding to the parameter `state`
+**Example:**
+```lua
+local stateLabel = getStateLabel(get_state())
+local active, remaining = get_timer("myTimer")
+if remaining > 0 then
+    stateLabel == StateLabel.." "..remaining
+end
+set_sVirt("Countdown",stateLabel)
+```
+---
+##### set_sGbl("index",value)
+* store `value` in the global status table under `index`
+* value can be a number or string but if storing a boolean use the **tostring()** function
+**Example:**
+```lua
+local mpe = false
+local sp = get_channel_val(1,5)
+if sp > 15 then
+    mpe = true
+end
+set_sGbl("minPressureExceeded",tostring(mpe))
+```
+> store boolean value **minPressureExceeded**
+---
+##### set_sVirt("index",value)
+* sets a virtual status channel with channel name `index`
+> **Note:** Once you create a virtual channel, you can add that channel to the dashboard using the channel name `index`
+**Example:**
+```lua
+local sp = get_channel_val(1,5) --suction pressure
+local dp = get_channel_val(1,6) --discharge pressure
+local diffPress = dp - sp
+set_sVirt("SuctDischDiff",diffPress)
+```
+> calculate the differential between suction and discharge pressure and assign to virtual channel
+---
+##### set_timer("index",secs)
+* activate timer `index` and set countdown time to `secs`
+**Example:**
+```lua
+set_timer("myTimer",300)
+```
+> create timer `myTimer` and start countdown time to 300 seconds
+---
+</markdown>
+==== - Master Control Script ====
+{{ :documents:de4000:control.jpg?nolink&600 |}}
+When you enter a control setup under the Global Control page the code that runs is called MasterControl.
+If you wish to modify this functionality you can copy this code into the Control Script editor and{{ :documents:de4000:scripting_dashboard_control_script.jpg?nolink|}} make your changes to the standard configuration.
+<file lua [enable_line_numbers="true"] mastercontrol.lua>
+  local rampRate1 = get_gbl("rampRate1",0.8)
+  local rampRate2 = get_gbl("rampRate2",0.8)
+  local dischTerm = tonumber_def(get_gbl("spDischTerm",0),0)
+  local dischChan = tonumber_def(get_gbl("spDischChan",0),0)
+  local suctTerm = tonumber_def(get_gbl("spSuctTerm",0),0)
+  local suctChan = tonumber_def(get_gbl("spSuctChan",0),0)
+  local suctMin = tonumber_def(get_gbl("suctMin",0),0)
+  local recycleMin = tonumber_def(get_gbl("recycleMin",0),0)
+  local recycleMax = tonumber_def(get_gbl("recycleMax",0),0)
+  local suctSp = tonumber_def(get_gbl("suctSp",0),0)
+  local dischMax = tonumber_def(get_gbl("dischMax",0),0)
+  local dischSp = tonumber_def(get_gbl("dischSp",0),0)
+  local outputTerm = tonumber_def(get_gbl("outputTerm",0),0)
+  local outputChan = tonumber_def(get_gbl("outputChan",0),0)
+  local recycleTerm = tonumber_def(get_gbl("outputTerm2",0),0)
+  local recycleChan = tonumber_def(get_gbl("outputChan2",0),0)
+  local speedRevAct = tonumber_def(get_gbl("speedRevAct",0),0)
+  local recycleRevAct = tonumber_def(get_gbl("recycleRevAct",0),0)
+  local outputLow = tonumber_def(get_gbl("outputLow",0),0)
+  local outputLow2 = tonumber_def(get_gbl("outputLow2",0),0)
+  local outputHigh = tonumber_def(get_gbl("outputHigh",0),0)
+  local outputHigh2 = tonumber_def(get_gbl("outputHigh2",0),0)
+  local spSuctType = get_gbl("spSuctType","linear")
+  local spDischType = get_gbl("spDischType","linear")
+  local suctPIDPFactor = tonumber_def(get_gbl("suctPIDPFactor",0),0)
+  local suctPIDIFactor = tonumber_def(get_gbl("suctPIDIFactor",0),0)
+  local suctPIDDFactor = tonumber_def(get_gbl("suctPIDDFactor",0),0)
+  local dischPIDPFactor = tonumber_def(get_gbl("dischPIDPFactor",0),0)
+  local dischPIDIFactor = tonumber_def(get_gbl("dischPIDIFactor",0),0)
+  local dischPIDDFactor = tonumber_def(get_gbl("dischPIDDFactor",0),0)
+  local recycleCtrl = false
+  local recycleSuctionRev = false
+  local recycleDischargeRev = false
+  if recycleChan > 0 and recycleTerm > 0 then
+    recycleCtrl = true
+  end
+  local dischPct = 100
+  local suctPct = 100
+  local dischOutput = 0
+  local suctOutput = 0
+  local rSuctOutput = 0
+  local rDischOutput = 0
+  local minLoad = 0
+  local maxLoad = 100
+  local minRecycle = 0
+  local maxRecycle = 100
+  local speedTarget = get_sGbl("speedTarget",0)
+  local recycleTarget = get_sGbl("recycleTarget",0)
+  function map_range(rangeLow,rangeHigh,input)
+    if input <= rangeLow and input <= rangeHigh then
+      return 0
+    end
+    if input >= rangeLow and input >= rangeHigh then
+      return 100
+    end
+    local rangeDiff = math.abs(rangeLow - rangeHigh)
+    local min = math.min(rangeLow,rangeHigh)
+    local retval = math.abs(input - min) / rangeDiff * 100
+    if retval > 100 then retval = 100 end
+    if retval < 0 then retval = 0 end
+    return retval
+  end
+  local suct = false
+  local suctVal = 0
+  if tonumber_def(get_gbl("spSuctEn",0),0) == 1 then
+    if suctTerm > 0 and suctChan > 0 then
+      suctVal = get_channel_val(suctTerm,suctChan)
+      suct = true
+    end
+  end
+  if suct then
+    if spSuctType == "linear" then
+      local suctDiff = suctSp - suctMin
+      if suctDiff == 0 then suctDiff = 1 end
+      if suctVal < suctSp then
+        local suctErr = suctSp - suctVal
+        suctPct = suctErr / suctDiff
+        if suctPct > 1 then suctPct = 1 end
+        if suctPct < 0 then suctPct = 0 end
+        suctOutput = (1 - suctPct) * 100
+      else
+        suctOutput = 100
+      end
+    else
+      set_gbl("PIDsuctEnable",1)
+      set_gbl("PIDsuctPFactor",suctPIDPFactor)
+      set_gbl("PIDsuctIFactor",suctPIDIFactor)
+      set_gbl("PIDsuctDFactor",suctPIDDFactor)
+      set_gbl("PIDsuctSp",suctSp)
+      set_gbl("PIDsuctDeadband",0.2)
+      local suctPidOutput = doPid("suct",suctVal)
+      suctOutput = suctPidOutput
+    end
+  else
+    suctOutput = 100
+  end
+  local disch = false
+  local dischVal = 0
+  if tonumber_def(get_gbl("spDischEn",0),0) == 1 then
+    if dischTerm > 0 and dischChan > 0 then
+        dischVal = get_channel_val(dischTerm,dischChan)
+        disch = true
+    end
+  end
+  if disch then
+    if spDischType == "linear" then
+      local dischDiff = dischMax - dischSp
+      if dischDiff == 0 then dischDiff = 1 end
+      if dischVal > dischSp then
+        local dischErr = dischVal - dischSp
+        dischPct = dischErr / dischDiff
+        if dischPct > 1 then dischPct = 1 end
+        if dischPct < 0 then dischPct = 0 end
+        dischOutput = (1 - dischPct) * 100
+      else
+        dischOutput = 100
+      end
+    else
+      set_gbl("PIDdischEnable",1)
+      set_gbl("PIDdischPFactor",dischPIDPFactor)
+      set_gbl("PIDdischIFactor",dischPIDIFactor)
+      set_gbl("PIDdischDFactor",dischPIDDFactor)
+      set_gbl("PIDdischSp",dischSp)
+      set_gbl("PIDdischRevAct",1)
+      set_gbl("PIDdischDeadband",0.2)
+      local dischPidOutput = doPid("disch",dischVal)
+      dischOutput = dischPidOutput
+    end
+  else
+    dischOutput = 100
+  end
+  local minOutput = 100
+  local winning = 0
+  if suctOutput < minOutput then
+    minOutput = suctOutput
+    winning = 1
+  end
+  if dischOutput < minOutput then
+    minOutput = dischOutput
+    winning = 2
+  end
+  if suctOutput == dischOutput then
+    winning = 0
+  end
+  if winning == 0 then
+    set_gbl("PIDsuctMax",100)
+    set_gbl("PIDdischMax",100)
+  end
+  if winning == 1 then
+    set_gbl("PIDdischMax",math.min(suctOutput + 2,100))
+    set_gbl("integraldisch",0)
+    set_gbl("lastErrdisch",0)
+    set_gbl("outputSumdisch",0)
+    set_gbl("PIDsuctMax",100)
+  end
+  if winning == 2 then
+    set_gbl("PIDsuctMax",math.min(dischOutput + 2,100))
+    set_gbl("integralsuct",0)
+    set_gbl("lastErrsuct",0)
+    set_gbl("outputSumsuct",0)
+    set_gbl("PIDdischMax",100)
+  end
+  local recycleMinOutput = minOutput
+  local manOutput = 0
+  --********************************************************************
+  local manMode = 0
+  local manTerm = tonumber_def(get_gbl("manTerm",0),0)
+  local manChan = tonumber_def(get_gbl("manChan",0),0)
+  if manTerm > 0 and manChan > 0 then
+    local manInput = get_channel_val(manTerm,manChan)
+    if manInput > 0.5 then
+      manMode = 0
+      set_sVirt("SpeedControl","Auto")
+    else
+      manMode = 1
+      set_sVirt("SpeedControl","Manual")
+    end
+  else
+    if get_sVirt("SpeedControl","Auto") == "Auto" then
+      manMode = 0
+    else
+      manMode = 1
+    end
+  end
+  --if manMode == 1 and get_state() == 8 then
+  local manSpeed = get_sVirt("ManualSpeed",0)
+  local idleSpeed = get_gbl("idleSpeed",0)
+  local lowSpeed = get_gbl("lowSpeed",0)
+  local highSpeed = get_gbl("highSpeed",0)
+  local maxSpeed = get_gbl("maxSpeed",0)
+  local diff = highSpeed - lowSpeed
+  if diff < 0 then diff = 0 end
+  local maxDiff = maxSpeed - idleSpeed
+  if maxDiff < 0 then maxDiff = 0 end
+  if get_sVirt("speedBump",0) ~= 0 then
+    local si = get_gbl("SpeedIncrement",0)
+    local sip = get_param("SpeedIncrement",0)
+    if sip ~= 0 then si = sip end
+    manSpeed = manSpeed + (si * get_sVirt("speedBump",0))
+    set_sVirt("speedBump",0)
+  end
+  if get_sVirt("AutoManBump",0) > 0 then
+    set_sVirt("SpeedControl","Auto")
+    set_sVirt("AutoManBump",0)
+  end
+  if get_sVirt("AutoManBump",0) < 0 then
+    set_sVirt("SpeedControl","Manual")
+    set_sVirt("AutoManBump",0)
+  end
+  if manMode == 1 then
+    local manSpeedTerm = tonumber_def(get_gbl("manSpeedTerm",0),0)
+    local manSpeedChan = tonumber_def(get_gbl("manSpeedChan",0),0)
+    if manSpeedTerm > 0 and manSpeedChan > 0 then --*** USE SPEED POT TO SET SPEED
+      local speedInput = tonumber(get_channel_val(manSpeedTerm,manSpeedChan))
+      local speedPct = (speedInput / 5) * 100
+      if speedPct > 100 then speedPct = 100 end
+      if speedPct < 0 then speedPct = 0 end
+      manOutput = speedPct
+      manSpeed = math.floor((speedPct / 100) * diff + lowSpeed + 0.5)
+    else -- Use ManualSpeed to set speed
+      manOutput = ((manSpeed - lowSpeed) / diff) * 100.0
+      if manOutput < 0 then manOutput = 0 end
+      if manOutput > 100 then manOutput = 100 end
+    end
+    minOutput = manOutput
+  else
+    --speedTarget =
+    local stRpm = (speedTarget/100) * maxDiff + idleSpeed
+    if stRpm < lowSpeed then stRpm = lowSpeed end
+    if stRpm > highSpeed then stRpm = highSpeed end
+    manSpeed = math.floor(stRpm)
+  end
+  if manSpeed < lowSpeed then
+    manSpeed = lowSpeed
+  end
+  if manSpeed > highSpeed then
+    manSpeed = highSpeed
+  end
+  set_sVirt("ManualSpeed",manSpeed)
+  --********************************************************************
+  local output1 = 0
+  local output2 = 0
+  if spSuctType == "pid" or spDischType == "pid" then
+    output1 = map_range(outputLow,outputHigh,minOutput)
+    set_sVirt("out1",output1)
+    output2 = map_range(outputLow2,outputHigh2,recycleMinOutput)
+    set_sVirt("out2",output2)
+    local hasRPM = idleSpeed > 0 and lowSpeed > 0 and highSpeed > 0 and maxSpeed > 0
+    if outputTerm and outputChan then
+      if hasRPM then
+        local speedRpm = output1 / 100  * (highSpeed - lowSpeed) + lowSpeed
+        speedTarget = (speedRpm - idleSpeed) / (maxSpeed - idleSpeed) * 100
+      else
+        speedTarget = output1
+      end
+    end
+    if recycleTerm and recycleChan then
+      set_ao_val(recycleTerm,recycleChan,output2)
+    end
+    if get_state() == 9 then
+      speedTarget = get_sGbl("speedTarget",0)
+      if speedTarget > 0 then speedTarget = speedTarget - rampRate1 end
+      if speedTarget < 0 then speedTarget = 0 end
+    end
+    if get_state() < 8 then speedTarget = 0 end
+    set_sGbl("speedTarget",speedTarget)
+    set_ao_val(outputTerm,outputChan,speedTarget)
+    set_sVirt("spTarget",speedTarget)
+    if hasRPM then
+      local sRpm = (speedTarget/100) * maxDiff + idleSpeed
+      set_sVirt("Speed Target",math.floor(sRpm + 0.5))
+    end
+  else
+    -- Remember that minOutput is 0 - 100 pct of lowSpeed <-> highSpeed
+    -- We need to convert this to 0 - 100 pct of idleSpeed <-> maxSpeed
+    local suctPct = map_range(outputLow,outputHigh,minOutput)
+    local speedRpm = suctPct / 100  * (highSpeed - lowSpeed) + lowSpeed
+    minOutput = (speedRpm - idleSpeed) / (maxSpeed - idleSpeed) * 100
+    if minOutput <= speedTarget then
+      speedTarget = speedTarget - rampRate1
+      if speedTarget < minOutput then speedTarget = minOutput end
+    else
+        speedTarget = speedTarget + rampRate1
+        if speedTarget > minOutput then speedTarget = minOutput end
+        if speedTarget > maxLoad then speedTarget = maxLoad end
+    end
+    if speedTarget > maxLoad then speedTarget = maxLoad end
+    if speedTarget < minLoad then speedTarget = minLoad end
+    if recycleCtrl then
+      local recyclePct = map_range(outputLow2,outputHigh2,recycleMinOutput)
+      if recyclePct <= recycleTarget then
+        recycleTarget = recycleTarget - rampRate2
+        if recycleTarget < recyclePct then recycleTarget = recyclePct end
+      else
+        recycleTarget = recycleTarget + rampRate2
+        if recycleTarget > recyclePct then recycleTarget = recyclePct end
+      end
+      if recycleTarget > maxRecycle then recycleTarget = maxRecycle end
+      if recycleTarget < minRecycle then recycleTarget = minRecycle end
+      local recycleOutput = recycleTarget
+      if get_state() < 8 then
+        recycleTarget = 0
+      end
+      if recycleRevAct == 1 then
+        recycleOutput = 100 - recycleOutput
+      end
+      set_ao_val(recycleTerm,recycleChan,recycleOutput)
+      set_sGbl("recycleTarget",recycleTarget)
+      set_sVirt("recycleTarget",recycleTarget)
+    end
+    if get_state() == 9 then
+      speedTarget = get_sGbl("speedTarget",0)
+      if speedTarget > 0 then speedTarget = speedTarget - rampRate1 end
+      if speedTarget < 0 then speedTarget = 0 end
+    end
+    if get_state() < 8 then speedTarget = 0 end
+    set_sGbl("speedTarget",speedTarget)
+    set_ao_val(outputTerm,outputChan,speedTarget)
+    set_sVirt("spTarget",speedTarget)
+    local sRpm = (speedTarget/100) * maxDiff + idleSpeed
+    set_sVirt("Speed Target",math.floor(sRpm + 0.5))
+  end
+</file>